蒋淑兰

发布人:王懿鸿发表时间:2020-09-28点击:


 




蒋淑兰,四川邻水人,教授,硕士/博士生导师,地大学者青年拔尖人才,武汉英才优秀青年人才,中国机械工程学会和微米纳米技术学会高级会员。1988年生,2011年获西南大学工学学士学位,2015年获华中科技大学工学博士学位。2015年至2020年在西南交通大学工作,2018年至2019年在美国常春藤盟校哥伦比亚大学从事博士后研究。2020年调入中国地质大学(武汉)机械与电子信息学院。近年来主持国家自然科学基金面上和青年项目各1项;主持其他省部级、横向、GF横向科研项目多项。在Sensors and Actuators B: ChemicalAnalytical ChemistryJournal of Power SourcesComposite Structures Nanoscale等期刊发表SCI论文40余篇,其中第一或通讯作者发表SCI论文30篇,已授权发明专利7项,研究成果被谷歌学术引用1000余次。担任Sensors and Actuators A: Physical, Sensors and Actuators B: Chemical Physical Chemistry Chemical Physics等期刊审稿人和教育部学位中心论文评审专家。指导3名硕士生获得教学实验室开放基金项目,2名研究生获得国家奖学金和1名研究生获太合创新奖学金,1名研究生获校科报会一等奖。

联系方式:jiangshulan@cug.edu.cn 办公室:教二楼319

主要经历:

2020.09-2023.09 中国地质大学,机械与电子信息学院,教授

2018.11-2019.11 哥伦比亚大学,机械工程系,博士后

2015.07-2020.09 西南交通大学,机械工程学院,讲师/副研究员

2011.09-2015.06 华中科技大学,机械电子工程,工学博士

2007.09-2011.07 西南大学,机械设计制造及其自动化,工学学士

研究方向:

(1)先进制造技术:针对高端医疗器械,利用智能3D打印、光刻和纳米压印等智能制造方法开发高性能X射线源器件;针对航空航天装备、汽车和海洋装备等结构的界面失效和服役性能等不足,研究结构轻量化设计和增强增韧技术。

(2)装备优化及智能控制:针对航空航天中含能材料制造的分散和团聚问题和设备稳定性问题,研究和开发高端声频振动分散装备及其稳定性智能控制。

(3)智能检测及层析成像研究:针对航空航天装备结构损伤和可视化应用需求,研究工业过程智能传感与仪器、多模态过程层析成像、多相流过程测试建模等。

1708598156321

招生信息:

热烈欢迎对先进制造和装备优化及智能控制等方向感兴趣,具有良好专业基础与实践动手能力的硕士生和博士生加入课题组。课题组将提供良好的科研条件,并提供一对一指导,支持参加国内国际学术会议,推荐双一流985院校攻读博士学位或推荐出国留学攻读博士学位或联合培养。

科研项目:

1)广东省面上项目,2024.12-2026.12,主持

2)湖北省面上项目2023.12-2025.12主持

3)企业横向,2022.11-2024.12,主持

4)国家其他部委纵向,2023.10-2026.06,参与

5)国家自然科学基金面上项目,2018.01-2022.12,主持

6)国家自然科学基金青年项目,2017.01-2019.12,主持

7)青年拔尖高层次人才科研启动经费,2020.10-2023.10,主持

8)企业横向,2021.05-2022.5,主持

9GF横向,2022.06-2023.12,主持

10GF横向,2020.10-2022.12,参研

近年代表性论文:

[1] Ao Zhang,*** , Shulan Jiang*. Effects of surface micro-texturing laser-etching on adhesive property and failure behaviors of basalt fiber composite single-lap-joint. International Journal of Adhesion and Adhesives, 135, 2024, 103831.

[2] Shulan Jiang, ***, Hongyong Jiang*. Hierarchical microstructure design of CFRP/Al interface with ZnO-nanostructures and modified resin pre-coating: nano-mechanical interlocking. Composite Structures 322 (2023) 117429.

[3] Zeliang Hou, *** Shulan Jiang*. Enhancing the photoelectric performance of the self-powered all vapor-deposited CsPbCl3 ultraviolet photodetectors by a novel cadmium-doping strategy and heterojunction engineering. Solar Energy Materials and Solar Cells 251 (2023) 112175.

[4] Shulan Jiang,*** Linmao Qian*. pH and temperature dual-responsive hydrogel actuator with bidirectional bending behavior and ultra large bending angle. European Polymer Journal 197 (2023) 112296.

[5] Shulan Jiang, *** Xingyue Liu*. Ultrafast self-powered CsPbCl3 ultraviolet photodetectors with choline chloride for surface passivation and charge transport regulation. Journal of Materials Chemistry C, 2023,11, 5667.

[6] Shulan Jiang, *** Linmao Qian*. Fabrication of ultraviolet/thermal-sensitive PMMA/PDMS wrinkle structures and the demonstration as smart optical diffusers. Ceramics International 49 (2023) 10787-10794.

[7] Shulan Jiang, Ao Zhang, Xiaobin Zhan*, Hongyong Jiang. Surface microtexturing design, laser-etching and adhesive failure of aluminum alloy single-lap-joint: Experiment and simulation. Thin-Walled Structures 193 (2023) 111237.

[8] Hongyong Jiang, *** Shulan Jiang*, Yiru Ren. High-efficient improvement in flexural properties of carbon/Kevlar-fiber hybrid composites by CNT-toughening only between xenogeneic fiber-layers. Thin-Walled Structures 190 (2023) 110984.

[9] Shulan Jiang*, *** Tielin Shi, Linmao Qian. Thermal stress-induced fabrication of carbon micro/nanostructures and the application in high-performance enzyme-free glucose sensors. Sensors and Actuators B: Chemical, 345, 2021, 130364.

[10] Shulan Jiang*, *** Jiang Zhao. Tunable Optical Diffusers Based on the UV/Ozone-assisted self-wrinkling of thermal-cured polymer films. Sensors 2021, 21(17), 5820.

[11] Yong Peng, Shulan Jiang*, *** Linmao Qian. Direct ink writing combined with metal-assisted chemical etching of microchannels for the microfluidic system applications, Sensors and Actuators A: Physical, 315 (2020) 112320.

[12] Yong Peng, *** Shulan Jiang*. Effects of ultraviolet/ozone irradiation on glassy-like carbon film for the bioMEMS applications. Applied Surface Science, 533 (2020) 147443.

[13] Shulan Jiang*, *** Linmao Qian. Fabrication of MnO2/carbon micro/nanostructures based on Carbon-MEMS technique on stainless steel substrate for supercapacitive microelectrodes. Electrochimica Acta 303 (2019) 323-328.

[14] Shulan Jiang*, *** Tielin Shi, Zirong Tang. High performance wire-shaped supercapacitive electrodes based onactivated carbon fibers core/manganese dioxide shell structures. Ceramics International, 2017, 43: 7916-7921.

[15] Yong Peng, Shulan Jiang*, *** Linmao Qian. The formation mechanism of nondefective silicon micropatterns fabricated by scratching assisted electrochemical etching. ECS Journal of Solid State Science and Technology 82019P464-P471.

发明专利:

[1] 蒋淑兰,艾子卿,余伟伟,王站起,一种碳微纳结构冷阴极加工方法,2025012600578920

[2] 蒋淑兰,彭勇,钱林茂,夏莉,一种新型多功能预应力柔性气动机器人及其加工方法,ZL.202010151190.2

[3] 蒋淑兰,任晔炜,钱林茂,彭勇,夏莉,尹晓麟,一种柔性主动式微混合器件集成系统及制备方法,202010299928.X

[4] 蒋淑兰,余丙军,钱林茂,韩京辉,钟方尚,王丰,一种制备硅微纳分级结构的新方法,ZL. 201611160207.0

[5] 蒋淑兰余丙军钱林茂王丰,一种具有内孔的碳基微纳分级结构阵列及其制备方法, 201611006293.X

[6] 蒋淑兰钱林茂彭勇余丙军,基于电化学摩擦诱导的微纳加工方法, 201811054774.7

[7] 雷宇,蒋淑兰,一种转动式摩擦发电机,201910822529.4

[8] 汤自荣,蒋淑兰,史铁林,夏奇,高阳,郑辉,一种集成加热部件的微型气敏传感器的制作工艺 ZL201310403030.2

[9] 钱林茂汪红波蒋淑兰李斌余丙军陈磊,基于微悬臂投影的光电式气敏传感器, ZL. 201610392191.X

[10] 钱林茂汪红波蒋淑兰李斌余丙军陈磊,基于微悬臂投影的光电式加速度传感器, ZL. 201610382181.8